Toyota Celica Supra grille badge (TOYOTA & 2.8GT)
Description
A set of two styles of badges that fit into the grille of a Celica supra, note that the grille in the car has to have the metal plate or else they won't fit. They also need the original hardware or anything similar. Installation tips: The letters have to be pushed into the holes then glued in with some super glue, note that despite the holes being the same diameter as the letters they won't fit unless you go at them with a small dremel drill bit. Also, in the 2.8 GT file, the GT had holes for it to be pushed into but that was later removed, but the holes on the base are still there. So use that as a guide to line up the GT letters properly.
Statistics
Likes
0
Downloads
0