GeoTrax Sloped Ramp Track
Description
This is my attempt at making a Geotrax ramp that can be printed on a regular-sized print bed. It is the length of an extra long GeoTrax straight track (3 short-track lengths), and the height of a standard riser (102mm). Use together with GeoTrax risers to built a track with a steeper slope than the regular ramps. The regular ramps have a length of 5 short-tracks instead of 3, but that wouldn't fit on my printer bed. This is a work in progress as I'm just learning CAD. I would love this to have gentle curves instead of straight-32 degree angle-straight again. If anyone wants to tinker with it I would much appreciate it. You can find it on tinkercad here: https://www.tinkercad.com/things/eZbdR6UmXv4-geotrax-sloped Big thanks to the work of @thjelmfelt here: https://www.thingiverse.com/thing:2627683. I moved the rails in slightly (1mm on each side) as the original model didn't quite line up with the real geotrax rails. If you print it diagonally on the print bed it will fit on a regular-sized printer like an Ender 3 (thought barely). You'll need supports and a resolution of 0.28 or lower. Use 3-4 shells and at least 10% infill.
Statistics
Likes
2
Downloads
0