Bicycle handlebar extension Garmin/GoPro
Description
Bicycle computer bar extension with GoPro and Garmin mounting or empty socket. Clamp diameter 30mm. Forward extension 95mm from the center of the handlebar. The middle part is 80mm wide. You need 2x M5 screws for assembly (threaded hole printed) and 2x M4 screws with nuts for the clamps, and 2x M3 for the Garmin/Bryton slot. There is a 2mm pin in the pivot point of the clamps (I made it from spokes)
Statistics
Likes
1
Downloads
0