IKEA Milsbo Acrylic Shelf Ramp Support
Description
Thing Description: This is an acrylic shelf bracket I made for the IKEA Milsbo intended to be attached to the door to provide extra support for a sagging shelf. It is designed so that as the door closed the shelf will naturally slide up the ramp part of the bracket and rest on top. Mounting Instructions: To find out where to attach on the door, just hold the bracket against the door and push up until the shelf is level, then mark with a pencil, use super glue or strong adhesive to attach. Note: If you paint the bracket (like I did) you may notice over time the paint scratching off, so I recommend printing in your preferred color to avoid this. Printing Note: Printing it vertically seems to yield the best results, I printed with 40% infill for strength.
Statistics
Likes
1
Downloads
0