Z-axis stabilization for Anycubic Vyper
Description
There are 3 versions, one for diameter 8mm, one for diameter 10mm and one vor 3/8". Threaded rod or tube can be used (it is clamped) I recommend a diameter 10mm aluminum tube. The parts should hold, so I recommend 70% filling! Supports are only needed at the bottom for the holes and nuts. Note, the height of the Vyper changes by 23mm. Parts List: 16x) M4x20 head screw 16x) M4 Nut 4x) M4x12 head screw 4x) M4 T-Nut 4x) M5x40 head screw for the top (replacing the original screws) 2x) D8 oder D10 ~480mm long, Threaded rod or tube
Statistics
Likes
54
Downloads
0