Print cooler for HEMERA with Revo Nozzle
Description
This is my design for a fan duct for the HEMERA with REVO Nozzle system. The coordinates for the BLTouch are: X=0.38mm; Y=-42mm You need support for the BLTouch version. Screws needed: For mounting the plate : 3x M3x8mm; For mounting the fan: 2x M3x25mm + 1x M3 Nut For the upper left fan mount, I needed a shortly longer screw as I was not able to connect the nut inside the HEMERA frame. But normally 25mm should fit.
Statistics
Likes
2
Downloads
0