Universal Filament spool holder
Description
I wanted a filament spool holder but didn’t want to pay for one so I remixed one I found to meet my needs. Holds your spool up and out of the way and uses the stock bolts from your printer plus two extra M3x 25mm. I also incorporated 608 bearings to allow the spool to roll easily. The last part you need is an axel for the bearings that will snuggly fit a 7.75mm hole. It was made to fit a creality ender 3 pro but will fit many other printers. The mounting holes to the printer are 18mm apart center to center. Print the stem upright and the holder on its side and you won’t need supports. Required: 5x608 bearings 1x7.75 diameter rod 2x m3x30 bolts
Statistics
Likes
25
Downloads
0