Leica Halfcase (Hex)
Description
Half case for the Leica M10. I had this SLS printed. You can try FDM printing this if you have good stringing control. This will not fit film Ms (no mounting point) or non-M10 style chassis Ms (thicc-er bodies). You will need 1/4" -20, (1/4" long) screw to mount this. McMaster part #91355A176 is what I uses. If you have one of those peakdesign bottom plate that comes with their strap you can use that same screw as well! Not for commercial use.
Statistics
Likes
2
Downloads
0