Pulley Adapter for Electric Skateboard Syl-08
Description
Hello guys! This kit of "pulley adapter" is born to make more strong the SYL-08 Electric Skateboard, what do i mean? With this pulley adapter kit, you will be able to reduce the ratio that is created between motor pinion and wheel crown, consequently, same motors, same esc, same battery, much more torque at the expense of a lower top speed! Each pulley adapter starts from a number of 72 "female" teeth, which are engaged by interference on the original pulley (in our case, of the syl-08), in case the adapter struggles to be inserted into the pulley, resize by 0, 5/1% the whole adapter, directly in the slicer, until you get a good fit. This pulley adapter then ends with the number of teeth, which represents the filename! The more teeth you add, the more torque you will develop, if your motor mounts are not adjustable then be prepared with different belt lengths! I have never had the opportunity to test these pulley adapters, because my MountainBoard is currently under the knife, upgraded with new motors, new Vesc, and many other things that we will soon see in the videos on my YouTube channel! So if you test it, I would kindly ask you for feedback, both on how the pulley adapters behave, and on your print settings to make them last over time, in any case, I leave you below some basic print settings that I have recommended to print these pulley adapters! Enjoy and ride safe! NuelSooN!
Statistics
Likes
0
Downloads
0