Traxxas Rally - DJI Air Unit - FPV Mounting Kit
Description
<strong>Bad Upload</strong> See: [https://www.thingiverse.com/thing:5333604](5333604) for any updates going forward. ----- This is a full DJI Air Unit + Traxxas Rally FPV solution for mounting, cooling and powering the Air Unit within the Traxxas Rally shell. See: [https://www.thingiverse.com/thing:4917008](4917008) for the main body enclosure by itself. You'll need: 1 x 40mm fan (10mm thick) 2 x M3 12mm (to hold the fans) 2 x M3 nuts (to hold the fan screws) 1 x M2 10/15mm (for the center hold-down) 3 x M3 12mm (10mm also) (roof & front-door) 2 x M3 12mm (10mm also) (antenna support/holder) 6 x M3 45mm socket head (roof mount and antenna mount) 10 x M3 nuts (stand-offs for the roof, main body and antenna holder) 2 x M3 washers (supports the antenna holder holes) 6 x M3 lock nuts (4 minimum) 3 x M3 12mm (to battery mount) You'll need supports for the the 3S Battery holder and the Case - Front parts. Everything else should be support free. The orientation should be correct when you open the files. The Air Unit is a tight fit, though no sanding should be needed. Make sure you get your fan wire out the back (under the air unit) before putting the front door on.
Statistics
Likes
0
Downloads
0