VCORE3 Y endstop for larger Y position than stock
Description
On my VCORE3 500, the stock Ymax endstop did not allow me to place Y=500mm far enough back into the printer and this meant I couldn't print on the bed at any dimension under Y=7mm (instead of Y=0!). The stock Ymax endstop was too big. This endstop allows for alot more adjustment in the Y+ direction (7.5mm more!) so you can use the entire print surface. You'll need to use a m5x10 screw (instead of the stock m5x12) to mount it to the 3030 rail.
Statistics
Likes
0
Downloads
0