Tyro99 Tyro109 SMA Pigtail Antenna Holder
Description
I wanted to mount a pigtail antenna holder on my Eachine Tyro 109, so I designed a mount for it. ## There are two variants: #### Variant 1 Here you have threads for M2 screw to fixate the pigtail holder. #### Variant 2 In this variant you have to use M2 screws and M2 nuts to fixate the pigtail holder. ## Every variant comes in three flavors: #### doublethread Here you can use two M3 screws to mount the holder into your frame, same way as the original antenna holder *WARNING*: Usually horizontal threads do not print well (or not at all), I would not advice to use this design! #### singlethreaded You'll have to use a long M3 screw and a M3 nut to fixate the holder in the frame. #### singlethreaded with nuts This flavor offers you the possibility to insert two M3 nuts into the holder, so that you can mount it equaly to flavor 1 but with no need of printing a horizontal thread. --> My favorite is "Variant 2 singlethread with inserts". A little anoying to mount but best stability for your antenna.
Statistics
Likes
0
Downloads
0