X_Gantry_Outer_Mount_Plate_Left (Larger Stepper Center hole)
Description
This is a minor remix of the outer X-Gantry plate for Edgar's design. This increases the size of the center ring for the stepper mount to 24mm to allow the bezel of the stepper motor to fit through the hole. *YOU WILL NEED TO USE M3 THREADED HEAT SET INSERTS FOR THE BELT TENSIONER* otherwise there will not be enough material for your screw to bite into. To print the right side mount, just mirror this along the X-Axis in your slicing software to print the right hand side. Heat Set Inserts: Inserts: https://www.adafruit.com/product/4255 Solder Iron Tip: https://www.adafruit.com/product/4239
Statistics
Likes
0
Downloads
0