Elegoo Saturn S Flex Plate Z Spacer
Description
Z axis extension for the Elegoo Saturn S. Based off of a US shipped Saturn S model purchased in early 2022. This extension is a spacer for the z-axis home sensor. The z-axis sensor rod and the location to place the spacer is highlighted in green in one of the images. NOTE: Both the 8mm and 9mm versions are included in the list of Downloads. Some printers ship with 8mm hole spacing, and some with 9mm hole spacing. Use the correct one that aligns with your sensor rod. This is for use with the Wham Bam Flexible Build System. You will want to replace the original M3 screws with M3 x 8mm length screws to make up for the thickness of the spacer. Thickness is 2.6mm as recommended by Wham Bam. NOTE that any modification to a printer is your responsibility. This can be printed on an FDM printer (as shown) or a resin printer. Obviously a resin printer would provide much more detail for small parts like this one. We recommend an infill that will give you maximum strength and best dimensional support such as 25-100%. Photo shows an FDM print in PETG.
Statistics
Likes
4
Downloads
0