Guitar trem stopper
Description
This is a trem stopper to suit most floating bridges. It uses a small sliding pin held in place with a bolt. You'll need an M3 metal dowel pin around 20mm long, you can get these pretty easily in packs of 5 or 10 in eBay. The locking bolt is either an M3 x 8, and you fit an M3 heat insert, or you can try an M5 threaded directly into the plastic. (Or an M4.5). The stopper mounts using a pair of wood screws with a 3mm diameter.
Statistics
Likes
1
Downloads
0