Mini RC Skidsteer Loader
Description
Parts you need apart from 3D printed parts: - LEGO parts shown in photos - N20 motors shown in photos - 5V 1A brushed ESC for motors (one for each motor - 5 total) - 2s lipo or liion for power everything - voltage regulator ( step down ), you need to step down 8V form battery to 5-6V for motors and electronics - 2xM4 Nuts (for joints holding upper arms) - 2xM3 Nuts (put it in motor mount 3) - 2xM3 screws (for holding cabin to motor mount 3) - 2xM2 Nuts (for joints holding upper arms) - 2xM2 12mm screws (for joints holding upper arms) - 4xM2 20mm screws (for screwing big spur gear to arms axles) - Lights (optional) - FPV AIO camera (optional) Other things to need: - drill for drilling out some holes (sometimes needed, depends of your printer precision) - sandpaper for grinding some parts if needed - CA glue and hotglue I don't print it by myslef so no printing info. I think from photos you can see how everything is put together, if you have any questions or troubles with building, please e-mail me at bartosz.chrzanowski.bch@gmail.com
Statistics
Likes
134
Downloads
0