SRAM AXS Wireless Blip Extension Bar Mount
Description
All - Here is a 3D printable SRAM Wireless Blip extension bar mount. Please print with a brim/skirt and oriented as shown. Supports are required. You will need a M6x1 x 30 mm socked head cap screw and a M6x1 nut to complete the assembly. McMaster P/N below for reference: M6x1 x 30 mm Socket Head Cap Screw: https://www.mcmaster.com/91292A139/ M6x1 Nut: https://www.mcmaster.com/91828A251/ And for those looking for that little bit more... There are Ti hardware options. M6x1 x 30 mm Socket Head Cap Screw: https://www.mcmaster.com/95435A984/ M6x1 Nut: https://www.mcmaster.com/91927A115/ Happy printing !
Statistics
Likes
3
Downloads
0