Fully Automatic Fishing Bobber
Description
I bought an Fully Automatic Fishing Bobber on eBay and tried to make one close to it and this is what I came up with. As of today, April 7th, 2022, I have not tried this but I will soon. I am working on other 3d printed projects. I will have more images and a video on how to put this together and how it works. I just wanted to get what I have posted for now. Everything is here and ready to print. Rotate "Top_Hook_Setter.stl" about 45 degrees in Cura, with a raft and support. For "Flag_Hook_Setter.stl" and "Center_Hook_Setter.stl" use support and raft. You may have to rotate it in Cura for a better print. Items needed: 1 - Two Springs - Extension Springs 10PCS Y Type Spring 304 Stainless Steel Pressure Spring Wire; Dia 1.0mm, Outer Dia 14mm, Length 50mm (Aliexpress.com, Amazon.com,) 2 - One fishing bead about 5mm You will need to glue the Center_Hook_Setter to the Top_Hook_Setter. Tie a fishing line arount the top of the Flag_Hook_Setter and thru the hole of the Center_Hook_Setter adding a small weight and a hook. Don't forget to add the small bead. You might can make the small bead in thinkercad with a hole in it. The filament I used is PETG. Resolution: .20, Infill: 50.
Statistics
Likes
7
Downloads
0