Basic Anycubic Vyper Feet
Description
These are basic feet for the Anycubic Vyper that just work without having to pull the machine apart or removing anything etc. Leave the rubber feet on the vyper simply slot these underneath, if you move the printer they will not be attached, the printer is simply sitting on top of these. (My Vyper is from 2022, i believe older versions may have different rubber feet.) Reason for making these where i need my printed to be lifted up so i have room for my raspberry pie usb leads, You also need to raise printer for fan upgrades i believe. They raise the vyper 25mm, plus an extra 2mm or so from the felt pads. My felt pads are 20mm in diameter and 4mm thick. if you print Ver.1 they have a flat bottom so any pads can be attached. Ver.2 have a 2mm indent for my 20mm pads. This is my first design, and my first upload. Although very basic and easy i often get stressed by people over engineering and not leaving enough details. Thanks for looking and i hope this is also useful for someone : )
Statistics
Likes
0
Downloads
0