Virpil T-50 Monstertech MFC Mount
Description
A mount bracket to get a Virpil T-50 stick base a lot closer to the user of a Monstertech MFC flight chair. Reduces the forward distance of the stick base measured from the bracket from 120mm to 30mm, height is fixed but provides very ergonomic solution and perfect clearance when used with the VIrpil 20cm s-shaped extension. You will need 4pcs of M5x30mm screws to mount the stick base to the mounting adapter, the washers included with the stick base are good. Also you will need the longer M8 countersunk screws that come with the Monstertech center mount kit. Printable in any plastic you like, I used PETG, 0.4mm nozzle, 0.2 layer height, 6 top and bottom layers, 4 perimeter layers and 25% honeycomb infill. Recommend supports for the overhangs of the smaller screw holes, they should come out easily with needle pliers.
Statistics
Likes
0
Downloads
0