LED Edge Lit Base for 2"x6" Subway Tile
Description
This is a Edge-lit LED display base I created for the 2"x6" Ice Beveled glass subway backsplash tiles available at Home Depot that has been Laser engraved. These tiles are available here for approx $1 each, in a sheet of 14: https://www.homedepot.com/p/MSI-Ice-Bevel-Subway-11-73-in-x-11-73-in-x-8-mm-Glass-Blend-Mesh-Mounted-Mosaic-Tile-9-6-sq-ft-case-GLSST-ICEBE8MM/302801298 This base takes about 3h:30m to print with the suplied .gcode file. This gcode file (and the corresponding .3mf file) have been tweaked for PLA to provide the perfect print everytime and almost twice as fast as using the default Cura 'Standard' profile. The button-battery driven LED Lights are available on amazon here and will need to cut down the length to 6" which provides 9 LED's for illumination: https://www.amazon.com/gp/product/B0852MD6HV ***NON-COMMERCIAL USE ONLY*** THIS FILE IS NOT FOR COMMERCIAL USE. You cannot use this file to create any product that is sold, traded or bartered for personal gain, monetary or otherwise. IF YOU WISH TO USE THIS FILE FOR COMMERCIAL PURPOSES PLEASE REQUEST A LICENSE FROM GLC@TFOMONTAGUE.COM There are 3 included files: Display Name Plate Stand - LED v13 (Final).gcode (Raw Print File <-- Recommended) Display Name Plate Stand - LED v13 (Final).stl (Raw design file w/no 3d print settings) Display Name Plate Stand - LED v13 (Final).3mf (Cura Project file, preconfigured to print)
Statistics
Likes
0
Downloads
0