Smartphone Stand #7 (flexible angle)
Description
This is just one of the structural ideas for a smartphone stand. YouTube: https://youtu.be/e6VofNe4jxI (The stand in the video is a bit older.) There are three types of hinge gap widths as files. It is recommended to print "hinge_gap_test.stl" first to determine which gap is appropriate. smartphone_stand_gap02.stl ... gap width = 0.2mm smartphone_stand_gap03.stl ... gap width = 0.3mm smartphone_stand_gap04.stl ... gap width = 0.4mm [size when folded] height:40mm, thickness:9.15mm, length:83.5mm [screws to use] M4 CAP bolt 25mm + spring washer + 10mmWasher x3 .. refer to the photo No nuts needed. It is recommended to use glue to prevent the screws from loosening. [print conditions] -printing type: FDM -printer: Original Prusa i3 MKS -filament: PLA -support: no -brim: no -raft: doesn't matter -print directions: Please refer to the photo [revisions] 2022/04/12 I made a detailed design change. 2022/04/11 I made a detailed design change. 2022/04/10 I made a detailed design change. 2022/04/09 Regarding the bolt used for the hinge, it seems difficult to obtain the 10mm washer of M5, so I redesigned it with M4. I also modified some details. 2022/04/08 The structure of the hooked part at the tip was changed. 2022/04/07 Increased length by 5 mm. A small latch was added. The photo remains the previous non-latch version. 2022/04/06 The basic structure remains the same, but various changes have been made.
Statistics
Likes
53
Downloads
0