Rotary Chuck
Description
I wanted a rotary chuck engraver so I remixed a few designs and came up with this. Hope you like it. Thank you to the original creators of the things I used for remixing and being able to produce this. You will need for this build; 2 @ M8 x 150mm Bolts 2 @ M8 X 25mm bolts 3 @ M8 Nuts 3 @ M8 Lock Nuts 1 @ M8 Washer 1 @ Gt2 6mm x 170mm closed loop belt 1 @ Gt2 60 teeth pulley 1 @ Gt2 20 teeth pulley 1 @ Nema17 0.9deg stepper motor 6 @ 608ZZ bearings 4 @ M4 Tee nuts 8 @ M4 x 10mm bolts 1 @ 2020 aluminium profile Some parts you will need to print a couple of Extras>>>>> I have not listed bolts required for Chuck assembly. I have included all stl files required for this build but >>>Please see original poster for Chuck assembly and build instructions https://www.thingiverse.com/thing:4139255 There are 2 choices of M8 Knob types included for the rotary support one is easier to print so your choice. 2 x M8 lock nuts to be used on bolt used for rotary support, the other on the bolt for the rotary chuck.
Statistics
Likes
36
Downloads
0