Waterjet for Jetboard
Description
This is a waterjet preferably for a waterjet driven surfboard. It has a 62mm impeller with 150mm of pitch and a 5mm driveaxle. It has place for a 5x11x4 bearing in each end of the driveaxle with an axleseal fitted on the inside of the inner bearing. Parts needed except for the 3D-printed parts: 2x Stainless or Ceramic 5x11x4 bearing 5x9x2 Axleseal 5mm Stainless axle The unit is still work in progress
Statistics
Likes
3
Downloads
0