Office Chair Couch Foot
Description
#This is a replacement foot for casters of your office chair, with standard shaft (7/16" diameter and 7/8" length), 12mm hight (10mm from the shaft hole to floor) , 42mm diameter. Office chairs' seat hight is sometimes higher than your needs and sometimes you can't make them any lower. For this situation you can replace the gas cylinder for a shorter one to reduce the height and maybe it is a standard method. But a chair gas cylinder sometimes is push in very tightly so difficult to pull out, and the procedure to replace them is sometimes dangerous if you don't have proper tool. So I decided to replace the caster wheels for lower feet. My chair has wheels with about 6cm height from floor to base shaft hall, and it could be lowered about 5cm by replacing it with this 1cm height, stable foot. I design this foot for shaft and hall of my chair, and it turned out that it is a standard size. Caster base shaft with 7/16" (about 11.1mm) diameter and 7/8" (22.2mm) length is common worldwide. So it just fit for most of office chairs, and maybe for you. #Caution Use TPU with 95A Shore hardness. Thanks to strong layer adhesion, flexibility and tensile strength, TPU printouts have excellent characteristics for furniture. It is important not to use fragile materials like PLA. Base shaft with PLA could easily broke up and the residual cannot get out of the hole.
Statistics
Likes
1
Downloads
0