Fishing Hooksetter
Description
I found this and thought I could make one and the rod holder. So I did. I have not tried it outside but it works inside. You will need to buy: 1) One or Two, 3 feet long, 3/8" (10 mm) wooden dowel(s). 2) String or small rope. The filament I used is PETG. Resolution: .20, Infill: 90. The "Fish Hooksetter" took about 1 hour to print, print speed at 40mm per second. The "Rod Holder Fish Hooksetter" took about 14 hours to print, print speed at 40mm per second. Here is a video of it. Not mine video but a video I found to show you how to set this up and use it. https://www.youtube.com/watch?v=hzG8eCv2ag4
Statistics
Likes
0
Downloads
0