Modulus ECS-10 Grip Assembly

Description

I'm re-uploading as the current design doesn't show up when searching. This is my Modulus ECS-10 grip replacement with hinged trigger, rev trigger, and new mag catch/release. It is a direct replacement for the stock grip with minimal shell modifications. It includes space for a high current snap action switch and maintains the rev trigger lock out feature. If you don't want the lockout then just cut off the top of the rev trigger piece. This is a nice comfortable grip but it is a bit on the larger side. I don't have huge hands but they are on the larger side and it is very comfortable for me. I can't upload the pdf drawing to thingiverse but I'll take some screen shots of the views and upload those later. You will need a 4-40 x 1/2" screw along with a standard #4 washer for holding the pusher in place. There are (qty 3) 3/32" x 3/4" pins needed for the 3 triggers. The rest of the screws should be stuff you pull from blasters. I believe you can get by with re-using the screws from the blaster that you are modifying but you may want a couple more. The drawing DOES NOT show a screw that I used to keep the slot on the trigger in place on the pusher. The pusher has a hole in the post so a small screw with a flange head or one of the small shell screws with a #4 washer will hold it in place nicely.

Statistics

Category

Tags