Remixed "Kugellagerhalter" for IKEA Samla 22l Drybox
Description
With the original design of the "Kugellagerhalter" the ball bearing cannot spin freely. It is jammed. This is mentioned in the comments of the original design. I also wondered how this was supposed to work. To not have to rework the prints I modified the "Kugellagerhalter" with Fusion 360. Thanks anyway for the initial design! I added a round cutout of 1 mm to both sides with the diameter from 12 mm to 24 mm. So the inner part of the ball bearing is still fixed and the outer part can run freely now. No support needed for this! And there is no gap for the filament spool to fall in! Since the 22l SAMLA box has changed (~Dezember 2021) I also added both versions with modified height. This was also mentioned in the comments. Height adjustment: -1 mm for the single and +2 mm for the double holder. Files with the ending "_edited" are for the old SAMLA boxes. Files with "edited" and the according height modification at the end of the file name are for the new boxes. Some hints for the project not related to the bearing holder but also mentioned in the comments: - the threaded rod lenght should be 337 mm. - the screw threads are not working in 0.2 mm resolution (0.1 mm resolution is working well) - check your threads on the fittings and print the according screws There are some additional things for this project that I might use. When my box is finished I will put everything I used in a collection.
Statistics
Likes
1
Downloads
0