Totally Not Another JWST Mirror
Description
Totally not another JWST Wall Mirror! Totally not. Totally. Designed in Fusion360 as my little introductory project to learn the program. Features include: Press-fit bowtie connectors, 1/4" center hole for IR sensor passthrough if you fancy backlighting, 1/4" by 1" slots for wall mounting. YOU WILL NEED: x19 "MODULES", x42 "CONNECTORS" Created for these mirrors: https://www.amazon.com/dp/B08NCXVQYQ?psc=1&ref=ppx_yo2ov_dt_b_product_details DESIGN NOTES: -Designed with the tolerance values of an Ultimaker S5. -Bowties are a perfect press-fit on an Ultimaker S5, scaled to 102%, so some experimenting may be necessary. Mallet or deadblow hammer might need to be used. OTHER NOTES: I sort of designed the wall-mount slots too small for most screws to fit into, so my workaround (because I'm definitely not lazy) was to insert 1/4" Drywall anchors into the center holes and when their accompanying screws were applied, securely hold it in place. Wire was then placed between the two like a hanger. Included is the Fusion360 file if you want to mess with it.
Statistics
Likes
0
Downloads
0