Universal Handlebar Phone Mount
Description
This is a fully adjustable phone mount using a ball and socket joint compatible with any type of filament requiring minimal support material aimed to be printed with any FDM 3D printer. This mount is designed to be compatible with vertically mounted phones with a width of 5.72 cm (2 ¼”) up to 10.8 cm (4 ¼”). This includes the smallest phones such as iPhone 13 mini up to the largest phones such as Samsung Galaxy S22 Ultra with a case. The mount can be attached to a cylindrical bar with a diameter of 0.8” to 1 ¼” which can be found on motorcycles, snowmobiles, jet skis, ATVs, etc. using two #6 or #8 bolts and nuts. The hole at the center of the Ball part is added intentionally to increase the number of walls to increase strength in the neck area. I would highly advise four walls and 50% infill for this part as the neck area is the first point of failure. A zip tie can be used to tie the Main Holder part to the handlebar using the hole on the side. This hole was added as a safety net to prevent the phone from getting damaged as a result of being dropped in case the mount breaks in an accident.
Statistics
Likes
12
Downloads
0