Pan Tilt for Heewing T1
Description
Pan and Tilt camera for Heewing T1. Designed for DJI FPV camera but should fit other cameras too. [See pan&tilt in YouTube video](https://www.youtube.com/watch?v=3MiI0bG51qw) #Printing# Print all parts and assemble as shown in the picture. I used EMAX ES08MA servos but any mini sized servo should fit the mount. #Detailed installation quide# * Push servo into *"base mount"* and use small drop of glue to secure it in place * Push *"servo ring"* over the servo to create smooth plane for the main camera mount to swivel on. * Push servos axis into *"Camera mount"* and use servos screw to secure the "camera mount" into the servo. * Screw DJI camera into *"camera mount"* from cameras **lower mounting holes**. (not too tight so that camera can pivot freely) * Screw *"arm"* to second servo and into DJI cameras **upper mounting hole** (not too tight so that camera can pivot freely) * [Pan & Tilt part is the same as I used for Ar Wing 900](https://www.thingiverse.com/thing:4932104)
Statistics
Likes
3
Downloads
0