KVM Switch Mount - RYXN
Description
Desk or wall mount for KVM Switch by "RYXN" - link to the one I bought below. Print the 2 sides and the jig for marking the screw holes if needed. It slides on, and can be used in whatever orientation (does not obstruct ports in any orientation). You will need to peel off the 4 rubber feet that come with it - they're just stuck on. Can use double-sided tape or 4 screws to attach to whatever you need it to. I used 4 of the screws pictured, but I'm sure others would be fine as well. Print sides in the orientation pictured (stopping tab down) Standard Quality Cura profile 20% infill for the sides 5% infill for the jig is what I used, can probably be 0% KVM Switch: https://www.amazon.com/gp/product/B099S4SH2W/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Statistics
Likes
1
Downloads
0