Coin coaster Euro 1
Description
Realistic Euro 1 coin as a coaster ========================== This is a replica of an Euro 1 coin for use as a coaster. The diameter is 10.1 cm (3.9 inches). You can use any filament color which you like for the Euro 1 coaster. The original color of the Euro 1 coin is a gold color called "Nordic Gold" for the outer part and a silver color for the inner part. Let the design of each object to be the upper side on your printer's build plate. The flat side is at the bottom. All STLs are already in the correct orientation. The Euro 1 coin now comes in 3 flavours. **Coin type A** ---------------- Coin coaster with top design and flat bottom side with 3 holes for the rubber stoppers on the bottom side. This design is printed in two steps. Print the inner part in a gold color. Print the outer part in a silver color. The parts must be glued together after the print Of course you can use the coin as a coaster also without the rubber stoppers. Download the following objects for this type of coin: Euro 1 inner A V1.stl -> print in silver color Euro 1 outer A V1.stl -> print in gold color Glue all 2 objects together to form the coin shown on the pictures. **Coin type B** ---------------- Coin coaster with top and bottom design. There are 3 holes for the rubber stoppers on the outer part of the bottom side. The print consists of the top and bottom inner and outer parts separate. The parts must be glued together after the print with the flat sides facing each other. Of course you can use the coin as a coaster also without the rubber stoppers. Download the following objects for this type of coin: Euro 1 btm inner B V1.stl -> print in silver color Euro 1 top inner B V1.stl -> print in silver color Euro 1 btm outer B V1.stl -> print in gold color Euro 1 top outer B V1.stl -> print in gold color Glue all 4 objects together to form the coin shown on the pictures. **Coin type C** -------------------- Pure coin with top and bottom design without any holes on the bottom part. The print consists of the top and bottom inner and outer parts separate. The parts must be glued together after the print with the flat sides facing each other. Download the following objects for this type of coin: Euro 1 btm inner C V1.stl -> print in silver color Euro 1 top inner C V1.stl -> print in silver color Euro 1 btm outer C V1.stl -> print in gold color Euro 1 top outer C V1.stl -> print in gold color Glue all 4 objects together to form the coin shown on the pictures. Enjoy printing these items.
Statistics
Likes
35
Downloads
0