Dragonfly - indoor glider toy
Description
Included here, for free, is the wings and the bonus balance weight of the Dragonfly indoor glider. If you like the design, the rest of the files for the rubberband launch gun and the dragonfly style body can be bought here: https://cults3d.com/en/3d-model/gadget/dragonfly-indoor-glider Dragonfly_wing.stl: - PLA or PLA+ (for required stiffness) - Print in vase/spiral mode with maximum 0.1mm layer height, and no bottom or top layers. Ca. 30 mins - CURA: Leave wing at default 45 degrees to the bed. - PrusaSlicer: "Slice gap closing radius" = 0.005 Dragonfly_balance_bonus.stl: - PLA+, PLA or PETG - Print with 100% infill for proper weight. Use brim if necessary for adhesion to printing bed. Layer height of max 0.15mm.
Statistics
Likes
2
Downloads
0