Yoga A940 USB cover replacement
Description
This is a replacement part for the Lenovo Yoga A940, it is a cover for the USB ports to either side of the display that the dial plugs into. I noticed that many of these machines sold used do not have these caps included. Pics show the printed part compared to the OEM part I have included two files, one with a hole on the backside for a magnet and one without the hole. I recommend installing a small magnet into this part as this will help hold the cover in place. This part is slightly more shallow than the OEM, so if your magnet extends past the part by 1-2mm, it should still fit. You can easily customize the file without the hole to fit a different diameter of magnet. This part is barely smaller than the original, and should fit even if you print it on an older machine. If you are using a newer machine or an SLA printer, I recommend scaling this part up very slightly for a more uniform fit. It will still remain in place even without scaling. This part should print flat on the build plate in current orientation without supports. If you have known adhesion issues, I recommend a raft or a brim as the part is quite small. TLDR: Just slice and print the model with a hole in it and install a magnet
Statistics
Likes
0
Downloads
0