NZXT H1 v2 3.5 inch hdd mod
Description
I needed my existing 14TB HGST hard drive mounted inside the NZXT H1v2 case, however the screw holes on h1v2 does not match the ones on hdd. I don't want to drill holes. Inspired by [thing:4622587](https://www.thingiverse.com/thing:4622587), I started my first 3d print project. The hole layout of v2 is different than v1, I had to mesure and design from begining. I started with a similar design as [thing:4622587](https://www.thingiverse.com/thing:4622587) but later on I found that it is better to have the mount as separate parts. What is required for this mod: 1. A 92mm x 14mm pwn fan to replace the original 92mm x 25mm rear fan. There is not enough room for a 3.5 inch hdd in NZXT H1v2 with the original rear fan. 2. 4 x 6-32 nuts. I do not trust tapping on the printed object.
Statistics
Likes
1
Downloads
0