K40 Laser mA Meter Housing
Description
I didn't want to drill a big hole on the control panel so I decided to mount the mA meter on the side next to the control panel area. This way I only have the 4 holes for the mounts and a small hole for the wires. On the housing, I also put holes, opposite of the mounting screws so one can fit a small nut driver in to secure the mA meter. Once the meter is mounted, I will use E6000 to glue the plugs I made for those holes. The E6000 allows for the removal of those plugs fairly easily if needed unlike super glue. I might expand on this idea by making one a bit larger t o hold a water flow indicator either digital or visual where the water flows through.
Statistics
Likes
1
Downloads
0