Sawyer inlet cap / cleaning coupling holder
Description
I bought Sawyer micro squeeze and after some testing decided that I will be using the cleaning coupling for backwashing of the filter. I didn't like having multiple pieces loose in my backpack, so I created this inlet cap. This keeps the inlet clean while the filter is not in use, and holds the cleaning coupling. This creates one complete filter unit, which can be thrown into a backpack and not be worried about managing multiple pieces. The cleaning coupling should screw effortlessly onto the print, if not, or if it is too loose, change the scale of the print in X and Y axis but not in Z axis, so that you don't change the pitch of the thread (XYZ axis in Cura, might be different in other slicers). The inlet cap weighs about 10g (30% infil). The assembled filter unit weighs about 76g (after use, so there is some water inside). Message me if you want the files in different format than STL (I used Autodesk Fusion 360 for design).
Statistics
Likes
0
Downloads
0