Spool Holder For SUNLU Brand Filament Spools
Description
For SUNLU Brand Filament Spools Only (It May Fit Others) ====================================================================== Update: 4-19-2022 I have added a Version 2 to the parts download section. It prints in 2 Pieces, rather than 3 pieces. This will fit on a 165x165mm Ender 2 Pro. April 13 2020 I got tired of my spool swinging back and forth every time my extruder retracted and advanced. Also, from time to time, when the roll was full, my old extruder would skip when the roll was rocking back and forth. This is a 3 piece set. Its a very loose fit, and it mostly keeps the filament from swinging and raises the spool to the center of it's axis. Once printed slide the right side on, then the middle piece, slide the spool on, and fit the left side piece in. It will drop in over the spool arm lip, and all three are the same diameter. and there is an out lip to keep it in place on the arm. If I buy a different brand, which is rare, I will update this with the brand and resized parts. Or feel free to copy the design, or change it.
Statistics
Likes
0
Downloads
0