Flywoo Explorer V2 ELRS Antenna Mount
Description
I had trouble finding a neat way to mount a Happymodel Ep1 2.4ghz ELRS antenna on my Flywoo Explorer LR4 v2, I started with zip ties and hot glue but wanted something clean and simple. After finding nothing which fit my needs on the internet, I decided to have a crack at making my own. I found the original STL file for the Explorer's camera bumper on thingiverse, so I was able to import it into F3D and make some simple modifications. it has 2 small rings which hold the antenna snugly, and a cut out to allow the body and extension wire of the antenna to pass through and under the camera. That's It !!! Since I used the original STL file for this design, I've had no issue with fitment or tolerance. It is one single replacement part with no additional or replacement hardware needed. No folding, clicking, or gluing into place required! Edit : Added the "Ratel2" version of the mount, this allows spacing for a full sized Caddx Ratel 2 camera's lens (or any similarly sized camera). this however does not provide a bumper to protect the camera Let me know how your experience was with this part and if I should make any changes!
Statistics
Likes
2
Downloads
0