Rims for Swinger T2M
Description
This is a remix of Goodson's Hobbies Rims intended for the T2M Swinger Crawler The rims fit to alternative Tires from https://de.aliexpress.com/item/32901519574.html The remix has less details and should be more robust. Note that these rims does not fit to the original wheel axles (T4942/18) ! As the original Swinger axle is of poor quality, very likely will brake and seems not to be available as spare part I replaced all axles by a modified screw: I cut off the head of a cylindrical screw DIN 912 M5 x 50mm and drilled 2 holes for the catch pins. Also the holes of the wheel hexagon head must be drilled to 5mm (original was 4.5mm). See attached picture DIY_Axle.JPG. These modified DIY axles are now robust an I believe they will never brake :-) For the original Rims there is a replacement for the outer parts of the rims as they tend to brake easily: Swinger_Blend4org_inner and Swinger_Blend4org_outer For best printing results I decided to split them into 2 parts. Just glue them together with CA glue and replace the original parts.
Statistics
Likes
1
Downloads
0