BIQU BX 35mm to 40mm Fan Adapter
Description
upgrade from a 35mm to 40mm fan on the BIQU BX for better cooling on the hot end heatsink. if you are going to print this, check that your 24v 40mm fan has the same hole spacing. If it doesn't, just edit the attached SCAD. below are the fan parameters for easy review. Here is the fan i used: https://www.amazon.com/gp/product/B07RJGXHPY/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 if you choose to buy this fan, you will need to splice the new fan with the original 35mm fan's JST connector. the connector on the new fan is too large. Also used: 4x M3x16mm screws 2x M3 nuts fan 1 = 35mm fan that came with the BIQU BX fan 2 = new 40mm fan // fan 1: diameter d_fan1 = 35; // fan 1: distance between screw openings ls_fan1 = 29; // fan 1: screw openings' diameter ds_fan1 = 4; // fan 2: diameter d_fan2 = 40; // fan 2: distance between screw openings ls_fan2 = 32; // fan 2: screw opening diameters ds_fan2 = 3.5;
Statistics
Likes
0
Downloads
0