Tenting Ergodox Case (1u | 80 keys)
Description
# 80 key tenting Ergodox case ### Parts to assemble both sides: | Count | Part | Notes | |:-----:|:----------------:|:----------------------------:| | 2 | bottom | 1 with usb, 1 without usb | | 2 | top | 1 with usb, 1 without usb | | 2 | plates | | | 6 | legs | | | 6 | feet | | | 18 | M3 inserts | | | 6 | M3 nuts | | | 12 | 10mm M3 screws | for attaching bottom to top | | 6 | 16mm M3 screws | for attaching legs to bottom | | 6 | 4mm M3 screws | for attaching feet to legs | ### Notes * The case only supports 1u outer row. * Currently, the plate only support 1u thumb cluster keys, but the plate may be easily adapted to support 2u keys. * Only one stl is provided for each part. Mirror the parts depending on your setup. * Plates with and without supports are provided. The version without supports is mainly meant for cutting out from acrylic etc. * Use as small and narrow M3 inserts as possible, some of the wider ones may not fit. * Use countersunk screws. * Feet should be printed in TPU or any other soft filament (for better grip). * The case supports PCB thickness of about 1.55-1.65 mm. * This case is not made to print fast or save filament, it's thick, robust, and strong. For more information visit the GitHub repository: https://github.com/ignasrum/ergodox-case
Statistics
Likes
2
Downloads
0