FPV standoff flag mount for rx, vtx, crsf, elrs and other electronics
Description
This is **rx flag mount** for an FPV drone that you can put on a **M3 standoff** to mount rx, small vtx or other electronics. Print it with TPU or other flexible plastic in order to fit the standoff. 3 models differ only by standoff hole diameter (hole gets wider near the edges for easier fit - first number is the narrowest part, second is the widest part of the hole): - 4.5-5.1mm is the true required size, but likely the print will be smaller and won't fit - 4.8-5.4mm is the recommended size to be printed with TPU - 5.1-5.7 is an oversized model provided just in case You can duct tape your rx/vtx to this flag or use a plastic tie if you want better ventilation. If you put rx facing outwards from the stack - you may be able to reach any buttons or antenna socket on it without disassembling the frame.
Statistics
Likes
1
Downloads
0