SCREWDRIVER with *Auto Lock Mechanism* and 5 1/4 inch Standard Bit Holder
Description
This screwdriver is from Canada.....it will make all your wildest dreams come true...You've always heard about it and wanted one...now you can have it....your friends will be jealous of you and your new screw driver....your wife will be more attracted to you.... Have you ever seen those shiny bits at the hardware store and said mannn i really want to use them somehow but wheere??....well here is your answer...this screwdriver base will hold 5 of those standard bits you find at the hardware store (0.25 inch hex width). It was designed for 3.5 inch long bits to slide in through the channel and snap into the self guiding and self locking button tabs on the side, this also has a "CUFF" that I had originally designed and thought up of that locks your bits in slightly when snap it into the top of the base collar for use....it will hold your bit in the collar so it wont fall out -There are 3 different parts -After you print the cuffling align the peg in the side hole and snap on the cuffling into the collar of the screwdriver base -Print four of the buttons and when you slide in the bits with the butt of the bit into the channel first, it will lock into the thumb button that you will use to slide the bits in and out of the hole -Use 50% fill on the handle print to make it strong and 4 pillars at the base so that it prints and sticks to the bed NON Commercial use ONLY Thanks...have fun....
Statistics
Likes
2
Downloads
0