Backgammon with magnetic hinges
Description
Scaled up 50% in width and depth, with a custom height. Holes made for 4x2mm magnets. Based on @Modellaner's version. Required print volume: 155mm x 250mm Full board size: 242,5mm x 306mm x 13,5mm Tiles can be squeezed in to a very tight friction fit, however this will cause stress on the plastic. I inserted the green tiles with force, but decided to sand down half a millimeter of the bottom of the red tiles, and it was still a tight fit. You might have to fiddle a bit around with these depending on your printing resolution and type os plastic used.
Statistics
Likes
3
Downloads
0