Replacement Clip for FiiO µBTR
Description
The plastic hinges on my FiiO µBTR bluetooth receiver broke, so I made a replacement. You still need the original spring and the small metal bolt. If you lost the bolt you might source a 1mm bolt from something else but I don't think you'll have much luck if you lost the spring as well. Print time is around 21m with my MK3s with a 0.1mm layer height. You should stick to 0.1mm or lower, 0.2mm could work but I didn't try since I wanted to get the hinges as smooth as possible.
Statistics
Likes
0
Downloads
0