Big 3 Upgrade 2 Gauge Wire Spacers to Prevent Rubbing for 2011-2016 Scion tC
Description
I have a 2 gauge big 3 upgrade kit and had my power cable secured to the existing factory wiring harness. I discovered it was slowly rubbing against the loom and damaging the cable insulation, so I designed these spacers to prevent that. There's 3 different models; one for the wiring loom by the alternator, one for the wiring loom towards the back of then engine, and one for the wire cover on the left of the engine. They all install using zip ties, thought you may want to use a little 3M tape under the wire cover spacer to keep it from moving around. These will work with cables that are 11-12mm in diameter. Just make sure you print these with ABS or ASA filament to withstand the heat. More Scion tC models at https://www.thingiverse.com/vampyrex13/collections/my-scion-tc-models. Buy Me a Coffee? ---------------- Do you like my work? You can buy me a coffee at https://ko-fi.com/vampyrex13.
Statistics
Likes
1
Downloads
0