Decorative Rolling Pin Hanger
Description
These are designed to hang 3" Decorative Rolling pins from a single screw. There is an 8mm x 3mm with a 2.5mm depth keyhole hook on the back. The small oval allows for the entire hook to print without supports. Carefully cutout the oval from the hook after the print is complete. One printing creates a pair of hooks. I used 3/16 Panhead wall anchors to hang the rolling pins. https://www.acehardware.com/departments/hardware/screws-and-anchors/anchors/5333356
Statistics
Likes
0
Downloads
0