Galaxy Tab S8 Ultra - Nuphy Air 75 Holder Adapter
Description
# Galaxy Tab S8 Ultra - Nuphy Air 75 Holder Adapter --- ## Why did I designed this? Keyboard Book Cover case of Galaxy Tab S8 Ultra is a good accesory. However, since it stands with kickstand attached behind, I had hard times woking with keyboard on bus or subway. Therefore, I needed a more comfortable solution to use keyboard while I'm on move. Placing the Tab on fixed-angle stand atttached with low-profile bluetooth keyboard seemd favorable and therefore, I designed this adapter stand. ## Functionality - NIcely stands on your legs when you are sitting - Designed to have magnets inside. So that Nuphy AIr 75 and its feets can be attached - Places for attaching sillicon legs - Nothing other than above. This is just a piece of plastics designed as a holder ## Print Materials, Settings & Requirements - ABS is recommended since tablet and keyboard might heat up enough to deform PLA - Consider these vefore you print: - Magnet holes were designed to hold 25 x 8 x 4 mm neodymium magnets - Be careful about magnet's polarity! Especially for side that attaches keyboard - Tolerance was set to 0.5 mm for all parts considering my print condition - **Therefore, I strongly recommend to redesign this item before you print based on your printer's accuracy and material's availability** - Due to monstrous size of Tab S8 Ultra, you'll need a build size bigger than 310 x 310 mm - I strongly recommend to print it vertically ## Future plans - Back side of this stand is quite thicker than it's need - On near future, I'll redesign this to have variable stand angle and various 'modules' - For example, Lamy pen holder & internal USB Hub can be implemented ## Disclaimer - It's free to redesign this project based on youre need (That's why I included .stp files) - But if you publish modified items, please just refer to this project as a source. That's it :)
Statistics
Likes
0
Downloads
0